1) Settings menu;
2) Advanced settings;
3) If the "Generator" mode is "ON" when the GEN input is enabled, it is necessary to
set "
cosφ
2 according to the following screens.
To enable the GEN input, a voltage signal of 95-240 VAC is required;
4) While the Manual mode is enabled, the "man" symbol will appear at the bottom of
the display in the main menu;
Note: For the PFW to work in the Automatic mode the "Manual" mode must be "Off";
5) Input of the number of stages to be used;
6) Target Cos 2 SIGN: setting of the type of
cosφ 2 (induct. or capac.);
PFW03-M8
Settings
– Advanced
