Wegmatt dAISy Owner'S Manual Download

Page: 13 / 13

Source code and schematics

Currently dAISy is only partially open source.

The core of dAISy, how the Si4362 radio IC is programmed to receive AIS, is available on Github. While
the project does not include all the functionality of dAISy as sold, I do backport any bug fixes that are
relevant to the task of receiving AIS.

https://github.com/astuder/dAISy

There’s also a long thread on 43oh that documents the journey of dAISy from its humble beginnings.

http://forum.43oh.com/topic/4833-potm-daisy-a-simple-ais-receiver/

If you want to mess with the real code, brick your device with custom firmware or even build your own
dAISy from scratch, please contact me.

Contact

The best way to reach us is by email:

daisy@wegmatt.com

You can also contact the designer of dAISy via

Github

43oh

Tindie

http://www.wegmatt.com

Wegmatt LLC
6356 138

Ave NE, #212

Redmond, WA 98052
United States of America

Summary of Contents for dAISy














Search results

Summary of Contents for dAISy

Reviews:

Related manuals for dAISy

Brands by name

Popular brands

Wegmatt dAISy, Owner'S Manual

Search results

Summary of Contents for dAISy

Reviews:

Related manuals for dAISy

Brands by name

Popular brands