9�4�4
Conversion of the clamping lever (Pos� 2)
Î
Connect the WEH
®
Connector to a test piece. Please refer to
Chapter 8. Operation
on page 17
.
Î
Bend the
key ring (Pos. 4) slightly apart
and twist it out of the bore of
the peg (Pos. 3).
Î
Push the
peg (Pos. 3) out of the
base unit (Pos. 1) and out of
the clamping lever (Pos. 2).
Î
Remove the
clamping lever (Pos. 2) from
the base unit (Pos. 1).
Î
Turn it upwards by 180°.
Î
Insert the
clamping lever (Pos. 2) into
the base unit (Pos. 1) again.
Î
The bore of the base unit has
to align with the bore of the
clamping lever.
MD-10015-L51-R1.1.0-03
Page 28
Operating instructions
AE
