5�2
Storage
Î
Follow the safety instructions in
and observe the following storage
times. The appropriate storage period applies from the date of delivery (i.e. the date
of invoicing or goods issue date as recorded by WEH or its distributor). If the
WEH
®
Product is installed in a complete system, the storage time depends on the
component with the shortest storage time.
Up to 3 years
Î
Note:
If you should have any doubts about the aging state of the
stored WEH
®
Product, please contact WEH.
Attention:
Before commissioning, check the WEH
®
Product for leak
tightness. On this topic, see
Chapter 7. Installation on page 14
.
> 3 years
- Before use, all elastomer seals must be replaced.
Î
For this, send the WEH
®
Product to WEH for maintenance.
6. REQUIRED TOOLS
Part no�
Description
Installation
--
Suitable open-ended spanner
(suitable for the relevant spanner widths)
X
--
Suitable calibrated torque wrench
(suitable for the corresponding torque)
X
--
Suitable open-ended spanner insert
(suitable for the relevant spanner widths and torque spanner)
X
MD-10235-L51-R1.0.0-03
Page 13
Operating instructions
AE
