27
5.
Blade is blunt or deformed,
Contact your local dealer for re-sharpen
details or replacement.
6.
Check the belt and tensional state, adjust on request.
Important: switch
off the engine until the machine come to a completely stop.
Transmission belt
excessive wore or
damage
1.
Check alignment of engine pulley and gearbox pulley and adjust the
position of big pulley on gearbox and re-lock it.
2.
Check if the belt tensioner is assembled securely and properly adjusted.
Adjust the tensioner or clutch cable to improve the wear. You can also
change the engine position on machine chassis on request to improve
the wear.
3.
Contact your local dealer
Blade can not work
well
1.
Check if the belt is assembled securely and adjust it on request.
2. Check belt tensioner and replace it on request.
3.
Check belt pulley
4. Belt damaged. Replace with new belt from WEIBANG.
5.
Make sure the machine has select low speed gear for cutting.
6.
Check if the rear wheel bracket and spring are assembled properly, if all
fasteners is tightened securely. Adjust any components on request.
Belt fall off
1.
Adjust belt tensional pulley
2.
Check the belt
tensioner and
replace with new one, please contact you
local dealer and ask for service.
B
olt is loosen or
damaged
1.
Machine vibration will cause to loosen, regularly check and tighten all
bolts.
2.
Only use high strength lock nut or bolt (8.8grade) for wheel shaft
Tires wear
excessively
1.
Make sure the gearbox is set in slow speed gears during cutting sod.
2.
Tire wear is normal and expected. The machine walks on too hard or
rough surface will increase the wear. Contact you local dealer and ask for
service.
Can not shift the
gear selecting lever
fluently.
1. Adjust the shifting spring in gearbox,
2.
S
hifting spring is damaged, replace it with new one from WEIBANG
3. The controlling structure of gear selecting lever is damaged, replace it
with new one from WEIBANG
Please contact your local dealer for service.
ALWAYS MAKE SURE THAT THE MACHINE IS TURNED OFF AND ON STABLE
GROUND PRIOR TO PERFORMING ANY ERVICE OR TROUBLESHOOTING PROCEDURES.
Service
Exploded views and information on spare parts can be found under:
www.weibangusa.com
