3
c. Know and mark the location of any and all buried utility lines or sprinkler systems. If in
doubt, always check with your local utilities provider for survey information and
assistance.
d.
Check for ventilation in area. Do not operate the sod cutter or run the engine in
unventilated areas. Engine exhaust contains carbon monoxide, a deadly gas that is
odorless, colorless, and tasteless.
ALWAYS OPERATE CHIPPER/SHREDDER OUTDOORS!!
4
Always wear proper safety clothing and equipment for the job. These can and should include
eye and ear protection, gloves, dust mask and any other items that are appropriate for the job and
jobsite requirements.
●
Never wear any jewelry, neck ties, or other loose or hanging items that can be caught on
any part of the machine.
●
Tie back or remove any loose hair, clothing and any other potential hazards and
obstructions. Keep all hands, loose clothing, hair, jewelry and all other personal parts and
belongings away from moving parts of the machine.
●
Avoid coming in contact with the muffler and other engine parts after the engine is started
and the time immediately after the machine is turned off. Machine and engine
temperatures may exceed 150°F or 66
℃
. Machine must be allowed to cool before
touching it or attempting to perform any maintenance!
●
Do not tamper with the engine governor settings on the machine; the governor controls
the maximum safe operating speed and protects the engine and all moving parts from
damage caused by dangerously high speeds.
●
Do not transport or move machine while the engine or machine is running.
5.
For the safety of others and that of the operator, observe the following precautions:
●
While the machine is in use, keep observers and bystanders at least 35 feet away from
the sod cutter and its immediate working environment.
●
Stop operations or if anyone or anything (i.e.: humans, animals, etc.) approaches from the
front or the sides while the machine is in operation.
●
If the cutting mechanism strikes any foreign object or if the machine should start making
an unusual noise or vibration, immediately shut off the engine and allow the machine to
stop. Disconnect the spark plug wire from the spark plug and take the following steps:
i. Inspect for damage.
ii. Replace or repair damaged parts.
iii. Check for and tighten any loose parts.
●
Stop work and turn off the sod cutter if chipping jams the machine or causes it to labor
unnecessarily. Inspect the machine for any possible causes.
