background image

Part No. 158270  J02118-C  R0200A 

Printed in China © 2000 Sears, Roebuck and Co.

Ordering Replacement Parts

Full 90 Day Warranty

QUESTIONS?

If you find that:

•  you need help assembling or

operating the WEIDER

®

PRO 125

Weight Bench

•  a part is missing

•  or you need to schedule repair

service

call our toll-free HELPLINE

1-800-736-6879

Monday–Saturday, 7 am–7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS

If parts become worn and need to
be replaced, call the following toll-
free number

1-800-FON-PART 
(1-800-366-7278)

The model number and serial number of your WEIDER

®

PRO 125

Weight Bench are listed on a decal attached to the frame. See the
front cover of this manual to find the location of the decal.

All replacement parts are available for immediate purchase or 
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

When requesting help or service, or ordering parts, please be
prepared to provide the following information:

•  The MODEL NUMBER of the product (831.150462).

•  The NAME of the product (WEIDER

®

PRO 125 Weight Bench).

•  The KEY NUMBER and DESCRIPTION of the PART (see the

PART LIST/EXPLODED DRAWING at the center of this manual).

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS WEIGHT BENCH EXERCISER, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the WEIGHT BENCH EXERCISER, free of charge.

This warranty does not apply when the WEIGHT BENCH EXERCISER is used commercially or for rental
purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

WEIDER is a registered trademark of ICON Health & Fitness, Inc.

Summary of Contents for 831.150462
















Reviews: