85
86
Axle
10
15.
Locate and open the parts bag labeled “ARM
ASSEMBLY.”
Press a 2” Square Inner Cap (59) into each end
of the Leg Lever (8).
Lubricate the 3/8” x 3 1/4” Bolt (101). Attach the
Leg Lever (8) to the Butterfly Front Leg (9) with
the Bolt and a 3/8” Nylon Jamnut (88).
16. Press two 1 3/4” Square Inner Caps (60) into the
ends of the the Right Butterfly Arm (18). Press
two Handgrips (99) onto the handle on the Right
Butterfly Arm.
Assemble the Left Butterfly Arm (17) in the same
manner.
17
59
60
18
99
99
Handle
60
9
17. Lubricate both axles on the Butterfly Top Frame
(19). Slide the Right Butterfly Arm (18) onto the
indicated axle.
Be sure the upper end of the
Butterfly Arm is behind the bracket on the
Butterfly Top Frame.
Tap two 1” Retainers (85) and a 1” Round Cover
Cap (86) onto the axle.
Be sure that the teeth
on the Retainers bend toward the Round
Cover Cap, as shown in the inset drawing.
Attach the Left Butterfly Arm (17) in the same
manner.
17
85
18
19
86
17
101
59
88
8
Arm Assembly
Lubricate
Bracket
Axle
15
16
