49
50
19
49. Wrap the Leg Press Cable (82) around a 3 1/2”
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the Butterfly Upright (4) with a 3/8” x 5”
Bolt (61) and a 3/8” Nylon Locknut (74).
Do not
tighten the Nylon Locknut yet. Be sure that
the Cable Trap is turned to hold the Cable in
the groove of the Pulley
.
4
74
44
82
37
61
50. Wrap the Leg Press Cable (82) around the 3 1/2”
Pulley (37) removed in step 42. Attach the Pulley
to the bottom of the Double U-bracket (42) with
the 3/8” x 2” Bolt (79) and the 3/8” Nylon Locknut
(74).
37
79
82
42
74
51. Wrap the Leg Press Cable (82) around a 3 1/2”
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the 3/8” x 5” Bolt (61) in the Butterfly
Upright (4) with a 3/8” Nylon Locknut (74).
Be
sure that the Cable Trap is turned to hold the
Cable in the groove of the Pulley
.
51
37
74
44
4
61
82
52. Attach the end of the Leg Press Cable (82) to the
Leg Lever (8) with a 5/16” x 2 1/2” Bolt (61), two
5/16” Washers (66), and a 5/16” Nylon Jamnut
(105).
Do not overtighten the Nylon Jamnut;
the Cable must be able to pivot freely
.
52
105
82
66
66
8
63
