4
1. Lift the Rail (1) until the tab on the Adjustment Leg
(6) can be inserted into a slot in the Incline Leg (5).
Be sure that the tab on the Adjustment Leg is
fully inserted into the slot in the Incline Leg.
2. Slide the Upper Bar (7) into the Rail (1). Using the
included allen wrench and an adjustable wrench,
attach the Upper Bar to the Rail with four 3/8Ó x 3/4Ó
Button Head Bolts (35) and four 3/8Ó Nylon Locknuts
(33).
Be sure that the Cord (11) is correctly routed
around all pulleys and that the pulleys and Cord
move smoothly.
Press the Rail Cap (10) into the Rail (1). Press two
Tree Fasteners (46) into the Rail Cap.
Insert the ends of the Foot Straps (37) through the
Strap Rings (39). Press the fastener strips on the
ends of the Foot Straps onto the other fastener strips.
3. Press a Round Cap (17) onto each side of the
Stabilizer (4).
2
1
3
ASSEMBLY
11
7
37
37
39
39
10
46
1
17
4
35
35
33
33
Before beginning assembly, carefully read the
following information and instructions:
¥ Place all parts of the BODY WORKS gym in a
cleared area and remove the packing materials;
do not dispose of the packing materials until
assembly is completed.
¥ Read each assembly step before you begin.
¥ As you assemble this product, make sure that all
parts are oriented as shown in the drawings.
¥
Assembly requires the following tools:
The included allen wrench
Your own adjustable wrench
1
5
6
