7
4. Apply a generous amount of the included
grease to the Pivot Axle (33) and to two 5/8"
Wave Washers (102).
Tip: Avoid pinching the Upper Wire Harness
(97).
Insert the Pivot Axle (33) through the
Upright (6). Then, slide a 5/8" Wave Washer
(102) onto each end of the Pivot Axle.
Slide an Upper Body Arm (12) onto the left side
of the Pivot Axle (33). Attach the Upper Body
Arm with a 5/16" x 1" Patch Screw (81), a Large
Axle Cover (94), and a 5/16" Washer (104).
Attach the other Upper Body Arm (12) in the
same way.
4
3.
Tip: Avoid pinching the Wire Harnesses (97,
54). Start all screws before tightening any of
them.
While a second person holds the Upright (6)
near the Frame (1), connect the Upper Wire
Harness (97) to the Lower Wire Harness (54).
Attach the Upright (6) to the Frame (1) with five
5/16" x 1" Patch Screws (81) and five 5/16"
Split Washers (105).
3
Avoid pinching the
Wire Harnesses (97, 54)
81
81
81
105
105
54
97
81
94
12
12
102
102
94
33
6
Grease
Grease
6
1
97
81
104
104
Summary of Contents for Black 100 Xpb Elliptical
Page 23: ...23 NOTES...
