9
3. Turn off the console.
To turn off the console, simple wait for a few min-
utes. If the walking belt is not moved and the con-
sole button is not pressed for a few minutes, the
console will turn off automatically.
HOW TO FOLD THE TREADMILL FOR STORAGE
When the treadmill is not in use, it can be folded to
the compact storage position.
CAUTION: You must
be able to safely lift 25 pounds (11 kg) to raise,
lower, or move the treadmill.
1. See drawing 1a below. Remove the frame pin. See
drawing 1b. Hold the treadmill frame with both
hands.
CAUTION: To decrease the possibility of
injury, bend your legs and keep your back
straight. As you raise the frame, make sure to
lift with your legs rather than your back.
Raise
the frame to the vertical position.
2. Using your right
hand, pull the
latch knob to the
right and hold it.
Raise the frame
until the hole in
the frame is
aligned with the
latch pin. Then,
slowly release the
latch knob.
Make
sure that the
latch pin is fully inserted into the hole.
3. Insert the frame
pin through the
lower end of the
right upright into
the hole in the
frame.
To protect
the floor or carpet
from damage,
place a mat under
the treadmill.
Keep the tread-
mill out of direct
sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85°
Fahrenheit.
HOW TO MOVE THE TREADMILL
Convert the treadmill to the storage position as
described on this page.
1. Hold the handrails and place one foot against one
of the wheels.
2. Tilt the treadmill back until it rolls freely on the
wheels. Carefully move the treadmill to the desired
location.
To reduce the risk of injury, use
extreme caution while moving the treadmill. Do
not move the treadmill over an uneven surface.
3. Place one foot against a wheel and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 3 above. Remove the frame pin.
2. See drawing 2 at the left. Hold the upper end of
the frame with your left hand. Pull the latch knob to
the right and hold it. Pivot the frame down until it is
past the latch pin.
Carefully lower the frame to the floor.
CAUTION:
To decrease the possibility of injury, bend your
legs and keep your back straight.
3. See drawing 3 above. Insert the frame pin through
the right upright into the hole in the frame.
1b
Frame
1a
Frame Pin
3
Knob
Frame
Hole
Frame Pin
Right
Upright
2
