7
8. Attach the Leg Lever Bumper (55) to the Front
Leg (6) with a #8 x 3/4” Tek Screw (62).
Press two 1 3/4” Square Inner Caps (42) into the
Leg Lever (7).
Lubricate a 3/8” x 2 3/4” Button Head Bolt (64)
with grease. Orient the Leg Lever (7) with the slot
on the side shown. Attach the Leg Lever to the
Front Leg (6) with the Bolt and a 3/8” Nylon
Locknut (76).
Do not overtighten the Nylon
Locknut; the Leg Lever must be able to pivot
easily.
8
64
76
6
7
42
62
55
42
Lubricate
Slot
6. Have a second person hold the Lat Tower (4) so
that the holes in the back line up with the holes in
the Upright (3). Attach the Lat Tower to the
Upright with four 3/8” x 1” Button Head Bolts (87).
Attach the Name Plate (89) to the Lat Tower (4)
with two #8 x 1/2” Tek Screws (56).
6
4
3
89
56
56
87
87
7. Press a 1 1/2” Round Inner Cap (38) into each
end of the Lat Tower Crossbar (10).
Attach two Eyebolts (34) to the Lat Tower
Crossbar (10) with two 5/16” Washers (59) and
two 5/16” Nylon Jamnuts (65).
Do not overtight-
en the Jamnuts; the Eyebolts must be able to
rotate freely
.
Attach the Lat Tower Crossbar (10) to the Lat
Tower (4) with two 3/8” x 3” Button Head Bolts
(70), two 3/8” Washers (75), and the Crossbar
Cover (93).
Be sure that the Eyebolts (34) are
oriented as shown in the inset drawing. If they
are not, turn the Lat Tower Crossbar around
and reattach it.
7
38
65
65
10
34
59
34
70
59
93
75
4
38
34
10
4
Side View
