12
18. Route the end of the High Cable (48) with the loop
down through the indicated slot in the Top Frame (6).
Wrap the High Cable around a 90mm Pulley (50) in
the direction shown. Attach the Pulley inside the
welded bracket on the Top Frame (6) with an M10 x
45mm Bolt (59) and an M10 Nylon Locknut (60).
18
48
19. Wrap the High Cable (48) around a 90mm Pulley (50)
in the direction shown. Attach the Pulley and two
Pulley Covers (28) to the indicated holes in the Pulley
Plates (25) with an M10 x 50mm Bolt (54) and an
M10 Nylon Locknut (60).
19
Slot
25
28
25
60
50
48
20. Wrap the High Cable (48) around a 90mm Pulley (50)
in the direction shown. Attach the Pulley and two
Pulley Covers (28) inside the welded bracket under
the Top Frame (6) with an M10 x 50mm Bolt (54) and
an M10 Nylon Locknut (60).
20
28
50
60
28
48
6
54
21. Attach the loop on the end of the High Cable (48)
inside the Adjustment Tube (14) with an M8 x 35mm
Bolt (68) and an M8 Nylon Locknut (70).
21
68
48
70
14
59
50
6
60
54
All manuals and user guides at all-guides.com
