8
5. Press a 50mm Square Inner Cap (37) into the end of
the Top Frame (6). Hold the Top Frame on the Rear
Upright (5) and the Front Upright (4).
Make sure that
the Weight Guides (13) are in front of the indicat-
ed brackets on the Top Frame.
Attach the Top Frame (6) to the Front Upright (4) with
an M10 x 70mm Bolt (57) and an M10 Nylon Locknut
(60).
Attach the Top Frame (6) to the Rear Upright (5) with
two M8 x 70mm Carriage Bolts (64), a 50mm x 102mm
Support Plate (21), and two M8 Nylon Locknuts (70).
Fully tighten all Nylon Locknuts used in steps 2
and 3.
5
60
57
6
37
64
21
13
4
5
70
6. Attach one Weight Guide (13) to the indicated brack-
et on the Top Frame (6) with an M8 x 38mm Bolt
(67), an M8 Flat Washer (72), and an M8 Nylon
Locknut (70). Attach the other Weight Guide to the
Top Frame in the same manner.
Press a 25mm Round Inner Cap (41) into the top of
each Weight Guide (13).
6
Brackets
72
13
6
70
41
67
Bracket
7. Align the upper bracket on the Seat Frame (7) with
the indicated hole in the Front Upright (4). Attach the
Seat Frame with an M8 x 65mm Bolt (66) and an M8
Nylon Locknut (70).
Attach the lower bracket on the Seat Frame (7) to the
Front Upright (4) with an M8 x 65mm Bolt (66), an
M8 Flat Washer (72), and an M8 Nylon Locknut (70).
7
70
66
4
70
7
72
66
All manuals and user guides at all-guides.com
