20
43. Press two 3/4” Round Inner Caps (34) into
each Pad Tube (28).
Insert a Pad Tube (28) into the Seat Frame
(36). Slide a Foam Pad (30) onto each end of
the Pad Tube.
Insert the other Pad Tube (28) into the Leg
Lever (29). Slide a Foam Foam Pad (30) onto
each end of the Pad Tube.
44. Locate and open the parts bag labeled
“VKR ASSEMBLY.”
Press 1 1/2” Square Inner Caps (32) into the
ends of the Left VKR Arm (79) and the Right
VKR Arm (80).
Attach the Left VKR Arm (79) and the Right
VKR Arm (80) to the VKR Upright (74) with
two 5/16” x 3” Bolts (75) and two 5/16” Nylon
Locknuts (3).
45. Attach the VKR Backrest (77) to the VKR
Upright (74) with two 1/4” x 2 1/2” Screws (43)
and two 1/4” Flat Washers (10).
Attach a VKR Armrest (78) to the Right VKR
Arm (80) with two 1/4” x 2” Machine Screws
(81) and two 1/4” Flat Washers (10).
Attach a VKR Armrest (78) to the Left VKR
Arm (79) in the same manner.
43
44
79
80
75
74
3
32
81
45
SEA
T ASSEMBL
Y
VKR ASSEMBL
Y
79
30
30
34
34
28
29
78
74
78
43
10
10
80
77
