7
3.
Identify the Left Upright (4), which is marked with
a sticker. Attach the Crossbar (2) to the Left
Upright with two M10 x 95mm Bolts (28) and an
M10 Nylon Locknut (40).
Do not tighten the
Nylon Locknut yet.
4.
Attach the Crossbar (2) to the Right Upright (5)
with two M10 x 95mm Bolts (28) and an M10
Nylon Locknut (40).
Do not tighten the Nylon
Locknut yet.
3
28
40
2
4
4
28
40
2
5
5.
Slide the Seat Carriage (6) onto the Frame (1).
Attach the Tether (38) to the Seat Carriage with
an M4 x 16mm Self-tapping Screw (37) and an
M4 Washer (42). Then, insert the Pin (17) into the
hole in the Seat Carriage and a hole in the
Frame.
Attach the Front Leg (3) to the Frame (1) with two
M10 x 55mm Bolts (32), four M10 Washers (36),
and two M10 Nylon Locknuts (40).
Do not tighten
the Nylon Locknuts yet.
5
3
40 36
36
32
17
38
37
42
6
1
