16
19. Apply grease to an M10 x 130mm Bolt (11).
Identify the Left and Right Press Arms (17, 18)
and orient them as shown.
Insert the Press Arm Spacer (42) between the
Press Arms (17, 18) as shown.
Attach the Press Arms (17, 18) to the Base (1)
with the M10 x 130mm Bolt (11) and an M10
Locknut (74).
Do not overtighten the Locknut;
the Press Arms must pivot easily.
Then, attach the Press Arm Spacer (42) to the
Press Arms (17, 18) with two M10 x 20mm
Screws (84), two M10 Washers (88), and the
Press Arm Spacer (42).
20. Identify the Left Butterfly Arm (15), the Left
Butterfly Pulley Bracket (20), and the Butterfly
Frame (7), and orient them as shown.
Apply grease to an M10 x 130mm Bolt (11).
Attach the Left Butterfly Arm (15) and the Left
Butterfly Pulley Bracket (20) to the indicated side
of the Butterfly Frame (7) with the M10 x 130mm
Bolt (11), an Upper Butterfly Bushing (52), and
an M10 Locknut (74).
Do not overtighten the
Locknut; the Butterfly Arm must pivot easily.
Repeat this step to attach the Right Butterfly
Arm (16) and the Right Butterfly Pulley
Bracket (21).
19
20
84
18
17
88
74
88
42
1
84
11
15
20
21
52
74
11
7
16
Grease
Grease
Summary of Contents for 831.14923.1
Page 40: ...40 NOTES...
