25
43
43. Route the Low Cable (43) under a Pulley (69).
Attach the Pulley (69), a Cable Trap (71), and
two Half Guards (72) to the indicated bracket on
the Base (1) with an M10 x 50mm Button Bolt
(76) and an M10 Locknut (74).
Make sure that the Cable Trap (71) is oriented
to hold the Low Cable (43) in the groove of
the Pulley (69).
69
74
76
72
72
1
43
44
44. Route the Low Cable (43) through the Upright
(5) as shown.
Attach a V-pulley (67) inside the Upright (5)
under the Low Cable (43) with an M10 x 65mm
Bolt (75), two M10 Washers (88), two 6.35mm
Spacers (94), and an M10 Locknut (74).
5
43
75
88
88
74
94
94
67
71
Summary of Contents for 831.14923.1
Page 40: ...40 NOTES...
