Wi-Fi device IE-WL-VL-AP-BR-CL
Web Console Configuration
3-40
•
Scan channels:
Pre-define communication and roaming channels.
•
AP alive check:
Allows Turbo Roaming to react faster to WLAN disconnections.
NOTE
Enabling this feature causes the IE-WL-VL-AP-BR-CL to send out alive check packets every 10 ms when there
is no traffic; the high transmission frequency of small alive check packets could potentially affect your other
wireless communications that use the same channel, so only enable this feature when you have full control of
the designated radio channel.
•
AP candidate threshold:
After the
“
AP alive check
”
declares the current access point is no longer available,
the surrounding access points must have good enough connection qualities (SNR/Signal Strength) in order
to qualify as AP candidates for client association.
AeroLink Protection (for Client/Slave mode only)
Setting
Description
Factory Default
Enable/Disable
Enable AeroLink Protection to allow wireless clients on the
same LAN network to automatically negotiate with each other
and form a redundant wireless communication, for more
details, see Status
AeroLink Protection Status
Disable
When
AeroLink Protection
is enabled, the following parameter will be shown:
•
AP alive check:
Enable to allow AeroLink Protection to react faster to WLAN disconnections.
NOTE
Enabling this feature causes the IE-WL-VL-AP-BR-CL to send out alive check packets every 10 ms when there
is no traffic; the high transmission frequency of small alive check packets could potentially affect your other
wireless communications that use the same channel, so only enable this feature when you have full control of
the designated radio channel.
MAC clone (for Client mode only)
