Wi-Fi device IE-WL-VL-AP-BR-CL
Web Console Configuration
3-67
The SNMP MIB file is also available from SNMP MIB File EXPORT.
To download the configuration to the IE-WL-VL-AP-BR-CL:
1.
Turn off the IE-WL-VL-AP-BR-CL.
2.
Plug in the EBR-MODULE RS232 to the IE-WL-VL-AP-BR-CL
’s RS
-232 console.
3.
Turn on IE-WL-VL-AP-BR-CL.
4.
IE-WL-VL-AP-BR-CL will detect the EBR-MODULE RS232during the boot up process, and download the
configuration from the EBR-MODULE RS232 to the IE-WL-VL-AP-BR-CL automatically. Once the
configuration downloads correctly, the IE-WL-VL-AP-BR-CL emits three short beeps and then continues
with the boot-up process.
5.
Once the IE-WL-VL-AP-BR-CL has booted up successfully, it will emit the normal two beeps, and the ready
LED will turn to solid green.
Load Factory Default
Use this function to reset the IE-WL-VL-AP-BR-CL and roll all settings back to the factory default values. You
can also reset the hardware by pressing the reset button on the top panel of the IE-WL-VL-AP-BR-CL.
Account Settings
To ensure that devices located at remote sites are secure from hackers, we recommend setting up a
high-strength password the first time you configure the device.
