Wi-Fi device IE-WL-VL-AP-BR-CL
Web Console Configuration
3-43
In this scenario, the AP would assign every packet it accepted to a VLAN. Each packet would then be identified
as marketing or human resource, depending on which wireless client received it. The AP would insert VLAN
headers or
“
tags
”
with identifiers into the packets transmitted on the wired backbone to a network switch.
Finally, the switch would be configured to route packets from the marketing department to the appropriate
corporate resources such as printers and servers. Packets from the human resource department could be
restricted to a gateway that allowed access to only the Internet. A member of the human resource department
could send and receive e-mail and access the Internet, but would be prevented from accessing servers or hosts
on the local corporate network.
Configuring Virtual LAN
VLAN Settings
To configure the IE-WL-VL-AP-BR-CL
’
s VLAN, use the VLAN Setting page to configure the ports.
Management VLAN ID
Setting
Description
Factory Default
VLAN ID
ranges from
1 to 4094
Set the management VLAN of this IE-WL-VL-AP-BR-CL.
1
Port
Type
Description
Trunk Port
LAN
This port is the LAN port on the IE-WL-VL-AP-BR-CL.
Yes
WLAN
This is a wireless port for the specific SSID. This field will refer
to the SSID that you have created. If more SSIDs have been
created, new rows will be added.
Port PVID
Setting
Description
Factory Default
VLAN ID ranging from 1
to 4094
Set the port
’
s VLAN ID for devices that connect to the port. The
port can be a LAN port or WLAN ports.
1
VLAN Tagged
Setting
Description
Factory Default
A comma-separated list
of VLAN IDs. Each of
the VLAN IDs range
from 1 to 4094.
Specify which VLANs can communicate with this specific VLAN. (Empty)
NOTE
The VLAN feature can allow wireless clients to manage the AP. If the VLAN Management ID matches a VLAN
ID, then those wireless clients who are members of that VLAN will have AP management access.
CAUTION: Once a VLAN Management ID is configured and is equivalent to one of the VLAN IDs on the AP, all
members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.
