WI-GTWY-9-xxx Wireless Gateway V1.18
44
4.2.1
Program Operation
Start the software by either clicking on the start bar and navigating to the Configuration menu or
by running WI SERIES.EXE in the directory selected in the setup stage.
The Initial screen will appear.
From the initial screen, , you can
select an existing project, or start
a new project. The name of the
project will create a new folder
which will eventually contain the
configuration files for the
modules in this system. Project
folders are located under the
folder \Projects\ - for example,
if you create a project called
“Fire Pumps”, then the files for
this project will be found in the
folder c:\……\Projects\Fire Pumps\.
When you have selected the project, a screen will appear
where you may enter the system address.
If you are editing an existing project, the system address
will already have been entered. Do not change the system
address unless you are going to re-program all of the
modules in the system.
Password
. You have the option of entering a password to
protect the configuration files against unauthorized
changes. When you open a new project, you will be asked
to enter a password - if you do not enter any text - that
is, press “ESC” or “Enter”, then password protection is
disabled. If you do enter a password, then you will need to
enter this password to access the project. Without the
password, you are unable access the project
The password can be between 6 and 256 characters. You
