25
2583070000/00/04.2018
2 General safety notes
2.1 Intended use
The machine is intended for cutting circular conductors
to length. Only the material described below may be pro-
cessed using the machine.
The machine must only be used within the technical limits
described (see section 3.1).
Modifications to and reconstructions of the machine must
not be performed.
Intended use also includes paying attention to the docu-
mentation.
2.2 Processable material
Flexible wires with a cross-section of:
– Flexible wire
0.08–10.0 mm² (AWG 28-8)
– Solid wire
0.08–2.50 mm² (AWG 28–14)
2.3 Safety equipment
The machine is equipped with the following safety devices:
– Protective cover
– Emergency stop
– Mains adapter
These items of safety equipment must not be rendered
ineffective. They must be checked once per year by a ser-
vice technician.
2.4 Personnel
Only trained personnel may operate the machine and per-
form maintenance activities. Training also includes having
fully read the operating instructions.
Repairs may only be performed following con-
sultation with Weidmüller Service and only by
an electrical specialist.
Keep the operating instructions stored so that
they can be inspected by operating personnel
at any time.
All documents can also be downloaded from
the Weidmüller website.
Summary of Contents for 25800100000
Page 2: ......
Page 44: ...2583070000 00 04 2018 44 Elektroanschlussplan Electrical connection layout...
Page 45: ...45 2583070000 00 04 2018...
Page 46: ...2583070000 00 04 2018 46...
