2583070000/00/04.2018
28
4 Transporting and setting up the machine
4.1 Installation location
The installation location must meet the following require-
ments:
– Stable foundation with straight, even surface (for ma-
chine weight, see section 3.1).
– Keep 30 cm work area free on both sides and in front of
the machine.
– Electricity connection easily accessible close by.
4.2 Transporting the machine
► Always wear work shoes with foot protection
when transporting the machine.
► Note the weight of the machine
(see section 3.1). Use a transport aid if necessary.
► To move the machine, always use the side carry han-
dles.
► To prepare the machine for shipping (e.g. in the event of
servicing), use the transport packaging.
4.3 Unpacking the delivery
► Check the delivery for completeness (for scope of deliv-
ery, see below).
► Store away the transport packaging.
► Ensure that the operating instructions are accessible to
the user at all times.
4.4 Scope of delivery
– Trimming machine
– Mains connection cable (10 A, 250 V)
– CD with software PCCUT
– PC connection cable
– Operating instructions
4.5 Establishing connections
► Set up the machine in the intended location.
► Insert the power cable into the mains connection socket
(Figure 3.1,
13
) of the machine and connect it to the
power supply.
Summary of Contents for 25800100000
Page 2: ......
Page 44: ...2583070000 00 04 2018 44 Elektroanschlussplan Electrical connection layout...
Page 45: ...45 2583070000 00 04 2018...
Page 46: ...2583070000 00 04 2018 46...
