31
2583070000/00/04.2018
Setting up the machine
5.8 Resetting the daily piece quantity
► Open Menu
7
.
► Continuously press
C
for at least 5 seconds.
The daily piece quantity is reset to zero.
5.9 Setting cable monitoring function
If this function is active, the machine detects whether there
is a wire between the feed rollers.
► Open the menu item “Cable monitoring” in Menu
6
.
► Use the arrow keys to select the required setting (1 =
active, 0 = not active).
► Press
E
to save the setting.
5.10 Setting the zero-overlap cut
If this function is active, a zero-overlap cut is carried out at
the start of every program.
► Open the menu item “0-cut” in Menu
6
.
► Use the arrow keys to select the required setting
(1 = active, 0 = not active).
► Press
E
to save the setting.
5.11 Setting the program start
If this function is active, the machine is started via a linked
PC and not via the start button.
► Open the menu item “PC start” in Menu
6
.
► Use the arrow keys to select the required setting
(1 = active, 0 = not active).
► Press
E
to save the setting.
5.12 Setting the start-up speed
The speed with which the machine ramps up after being
switched on can be modified.
► Open the menu item “Ramp motor” in Menu
6
.
► Use the arrow keys to select the required setting
(1 = fast, 10 = slow).
► Press
E
to save the setting.
5.13 Setting the length correction function
You can correct the cable feed via the length correction
function.
► Open the menu item “Correction” in Menu
6
.
► Use the arrow keys to select the required value
(-99 mm... +99 mm).
► Press
E
to save the setting.
Summary of Contents for 25800100000
Page 2: ......
Page 44: ...2583070000 00 04 2018 44 Elektroanschlussplan Electrical connection layout...
Page 45: ...45 2583070000 00 04 2018...
Page 46: ...2583070000 00 04 2018 46...
