Abisolier- und Crimpautomat /Stripping and crimping machine
CA 100 / 4-10
B-W20411-014.doc / Sep-15
14
7.5
Abisoliermesser
Vorsicht! Messer sind scharf.
•
Werkzeugeinheit in Grundstellung.
•
Schrauben in den Exzentern entfernen.
•
Exzenter abziehen.
•
Messer entnehmen, wenden oder durch Neue
ersetzen.
•
Messer und Messerunterlagen wieder einbauen.
•
Exzenter einstellen und Schrauben festdrehen.
→
Exzenter nicht vertauschen.
7.5
Stripping blades
Caution! Blades are sharp.
•
Tool unit in starting position.
•
Release the screws of the eccentrics.
•
Remove the eccentrics.
•
Remove the blades, turn them or replace them
by new ones.
•
Mount the blades and the spacers.
•
Adjust the eccentrics and tighten the screws.
→
Do not mix up the eccentrics.
V-Messer
V-blade
Messerunterlage
Blade spacer
Drahtfixierung
Wire holder
Exzenter
Eccentric
Bild / Picture 6: Abisoliermesser / Stripping blades