Cassita II/ Cassita II LED
Instructions for assembly
Version 10
2021-03-25
We reserve the right to make technical changes
Item number
116519-0000
Page 23/46
Fitting the rafter bracket without a mounting plate
1.
Fit the rafter bracket
Align the rafter bracket to the rafter
and mark where the two holes
should be drilled.
Make sure the required minimum
distance from the edge of the rafter
is kept. Drill the two ≤ Ø13 mm
through holes.
Push in the C2 plate dowels
together with the screws and the
shims. As you do this, ensure that
you do not bend the teeth on the
plate dowels.
Fit the rafter bracket to the rafter.