Cassita II/ Cassita II LED
Instructions for assembly
Version 10
2021-03-25
We reserve the right to make technical changes
Item number
116519-0000
Page 28/46
4.6 Assembling the light bar
The width of the LED light bar ensures that the wall brackets have to be pushed onto the
left and right of the end pieces of the LED light bar as far as they will go.
This means that, once the awning is attached, the adjusting bracket/headplate is flush
with the wall bracket. Please refer to the LED light bar assembly instructions for
information on the electrical connection for the LED light bar.
1.
Mount the wall bracket
Mark holes to be drilled,
drill holes and install bracket on
wall. Affix the bracket using 3
screws.
Align the wall bracket.
2.
Mount the light bar
Slide the light bar into the wall
bracket as far as it will go.
Slide the second wall bracket onto
the light bar.
Mark holes to be drilled, drill holes
and screw the light bar onto the
wall.
Align the wall brackets with the light
bar.
3.
Attach the awning
See Section 4.2.1, point 3
4.
Mount the clamp parts on the wall
bracket
See Section 4.2.1, point 4
5.
Mount wall bracket cover caps and
wall bracket cover profile
See Section 4.2.1, point 5
