© 2022 WEINZIERL ENGINEERING GmbH
Seite 4/22
2.1 KNX programming mode
The KNX programming mode is activated/deactivated either by pressing the recessed KNX
programming button
❶
.
When the programming mode is active, the programming LED
❷
lights up red.
2.2 Manual operation and status display
The LED Status
❹
lights up green when KNX bus voltage is present. This LED flashes red if the
application is not running, e.g. after an aborted ETS download. If manual operation is active, this is
indicated by the LED Status
❹
lighting up orange.
Summary of the states of the LED Status
❹
:
LEDs 1
– 4
❺
indicate TP telegram traffic.
LEDs 5
– 8
❺
indicate RF telegram traffic. If RF telegrams are received from another domain, the
LED Status
❹
flashes orange briefly in addition.
Summary of the states of the LEDs 1
– 8
❺
:
2.2.1 Manual operation TP
Briefly pressing button A
❻
activates manual operation for mode TP.
Pressing button A
❻
briefly deactivates/activates the forwarding of the group telegrams. This is
indicated by LEDs 1 and 2
❺
.
Pressing button B
❼
briefly deactivates/activates the forwarding of the physically addressed
telegrams and the broadcast telegrams. This is indicated by LEDs 3 and 4
❺
.
Pressing button A
❻
or button B
❼
for a long time exits manual operation.
Manual operation can be locked in the ETS database.
LED Status
Meaning
LED lights green
The device operates in normal operating mode.
LED flashes red
The device is not loaded correctly
e.g. after aborting a download.
LED lights orange
Manual operation is active.
LED briefly orange
RF telegrams from another domain received.
LED Status
Meaning
LEDs 1
– 4 briefly green
Manual operation is not active.
Telegram traffic via KNX TP.
LEDs 5
– 8 briefly green
Manual operation is not active.
Telegram traffic via KNX RF.