12 / 13
© 2016 Spectrum Brands, Inc.
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
A
B
Reference Guide
Kevo Convert at a Glance
1.
Only use to reset Kevo
Convert to delete all eKeys
from your system. See “System
Reset” for more information.
2.
Where all the programming
features are located.
3.
Use to enroll smartphones.
4.
Engages with turnpiece when
interior cover is installed. When
the cover is removed, the
turnpiece shaft can be used
to manually lock and unlock
the door.
5.
Use to enable and disable the
Status LED, Invert, Audio, and
Auto-Lock.
6.
Communicates whether the
door is locked or unlocked and
flashes red for a low battery
alert. Can be turned on and off
by Switch #1.
Kevo-Compatible Devices
Smartphones and Smart Devices
A Kevo-compatible smartphone (or
other mobile internet-connected
device or tablet) must have Bluetooth
Smart Ready/ Bluetooth 4.0 and an app
specific to the device must be installed.
Find out if your device is compatible
at www.weiserlock.com/kevo/devices.
Standard Key
Always make sure you have access
to your standard key.
Switches
Status LED Notifications
Switch 1
Status LED
Door lock status LED blinks every 6
seconds. ON position is factory default.
Switch 2
Invert
Only used for right-handed doors that
have installed silver components. See
page 6 for details.
on off
1. Reset
button
2. Back
panel
3. Program
button
4. Turnpiece
shaft
5. Switches
6. Status
LED
System Reset
If you wish to perform a system reset,
press
and hold
the Reset button on the back panel
for 10 seconds until the lock beeps.
WARNING:
Resetting your Kevo system will restore
your lock to factory settings and delete all smartphones
from Kevo’s memory.
After a system reset, you will need to re-enroll
your Owner phone. You will still be able to send
eKeys at no charge to anyone who previously
had an active eKey at the time of reset.
Amber flash
Door is locked
Green flash
Door is unlocked.
Red flash
The 4 AA batteries in the Kevo interior
are low and need to be replaced.
Switch 3
Audio
Beeping sound is heard during programming and normal
operation. ON position is factory default.
Switch 4
Auto-Lock
Automatically re-locks door 30 seconds after unlocking.
OFF position is factory default.
CAUTION:
With this feature enabled, it is
possible to lock yourself outside if you don’t have
an enrolled smartphone or standard key with you.
1
2
3
4
A
B
