background image

8 / 13

© 2016 Spectrum Brands, Inc.

Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471

7

 Perform the door handing process.

A

B

C

D

status 
LED

Install 4 AA batteries in the battery pack.

IMPORTANT: 

Make sure the door is open. Insert the battery pack 

while 

PRESSING AND HOLDING

 the Program button. Release the 

button when the battery pack is all the way inside the lock interior. 

IMPORTANT: 

The Status LED will flash red and green, and the 

lock will beep. Press and release the Program button again. 

The latch bolt will retract and extend on its own to learn the orientation of the door.

Red Status LED

OTHER DEADBOLTS:

If the Status LED is solid red after 
door handing, make sure the 
batteries are installed correctly 
and the lock interior is correctly 
installed. Perform steps B-D again.

The Status LED will turn green or red.

Green: 

Door handing successful. 

Continue to step 8.

Red: 

See “Red Status LED” below. 

If the bolt does not move, make sure the batteries are 
installed correctly, and perform steps B-D again.

This step will teach the lock the orientation of your door and is crucial for lock operation.

   Ensure correct polarity. For best 

results, use new, non-rechargeable 
Alkaline batteries only.

Right

BALDWIN ESTATE DEADBOLTS ONLY:

If your latch bolt is to the RIGHT of your 
interior assembly, and the Status LED is 
solid red after door handing, 

press and 

release the Program button again

. The 

door handing process will restart.

If you are unsure if your lock is 
Baldwin Estate, see chart on page 3 or 
compatible deadbolt list on page 11.

Summary of Contents for kevo convert 66102/01














Reviews: