background image

7 / 11

© 2017 Spectrum Brands, Inc.

USA: 1-800-677-5625 • Canada : 1-800-501-9471
www.weiserlock.com 

Download the Premis app and pair your lock to your phone

Download the Premis app from the App Store.

A

Follow the instructions inside the app to pair your smartphone, manage 
the settings of your lock, and send user codes to family and friends.

B

6

7

8

Install the interior cover

Important information about the interior cover: 

Cover Installation:

OPTIONAL: Re-key the lock

If desired, the lock may be re-keyed to work with your existing key. 
See the supplied SmartKey Re-key instructions for more information.

(3x)

K

K

Compatibilty

HomeKit™ requires an iPhone®, iPad® or iPod touch® with iOS 8.1 or later.

Controlling HomeKit-enabled accessories away from home requires 
an Apple TV® (4th generation or later) with Apple TV® software 7.0 
or later and an iPhone®, iPad® or iPod touch® with iOS 8.1 or later.

For best results, lock should be within 40 feet of 
an Apple TV® for remote capability.

The interior cover will be secured by 
three screws to prevent someone 
from removing the battery or 
tampering with your lock's setting.

The window on the interior 
cover is locked by default.

window

If the window is 
unlocked, it can 
slide up for more 
convenient access 
to the programming 
buttons and the 
battery pack while 
the cover is installed.

Note: The interior 
cover and battery 
pack access.

a

b

c

If you want to unlock 
the window

, remove 

the security screw. 

Skip to step b if you 
want to keep the 
window locked.

Install the 
interior cover.

Secure the 
interior cover 
with three 
(3) screws.

Summary of Contents for PREMIS












Reviews: