Weishi 60003 User Manual Download

Page: 1 / 11

The Weishi No.600

0Ⅲ

User Manual

Table o

Contents

INSTRUMENT FUNCTION..............................................................................................2

KEYS AND DISPLAY....................................................................................................... 3

2.1

THE KEYS FUNCTION................................................................................................ 3

2.2

THE PARAMETERS DISPLAY................................................................................... 4

2.3

CONNECTION...............................................................................................................5

INSTALLATION................................................................................................................5

3.1

THE BASIC EQUIPMENT COMPONENTS............................................................... 5

3.2

THE INSTRUMENT INSTALLATION........................................................................6

3.2.1

THE POWER SUPPLY INSTALLATION....................................................... 6

3.2.2

THE MICROPHONE CONNECTION..............................................................6

3.2.3

THE PRINTR CONNECTION.......................................................................... 6

OPERATION.......................................................................................................................6

THE USAGE OF KEYS.....................................................................................................7

5.1

The PRINT key............................................................................................................... 7

5.2

The SETTING key..........................................................................................................7

5.3

The VALUE key

↓

....................................................................................................... 7

5.4

The VALUE key

↑

....................................................................................................... 7

5.5

The BEAT MODE key................................................................................................... 7

5.6

The SIG.GAIN key

↓

................................................................................................... 8

5.7

The SIG.GAIN key

↑

................................................................................................... 8

5.8

The MEAS. TIME key....................................................................................................8

5.9

The SOUND key.............................................................................................................8

5.10 The PRINT key............................................................................................................... 8
5.11 The CURSOR keys......................................................................................................... 8

THE PARAMETER............................................................................................................9

6.1

The beat number (Frequency number) Manual and Automatic selection...................... 9

6.2

The lift angle................................................................................................................... 9

6.3

The test period.................................................................................................................9

THE TECHNICAL DATA...............................................................................................10

THE INSTRUMENT MATAINCE..................................................................................11

8.1

There is no reaction for the instrument after power on................................................ 11

8.2

The instrument can enter the test status after the sound of “DI”, but it can’t work after

installing the sensor................................................................................................................... 11
8.3

The LED signal is in red, but the shown lines is scattered or appear many lines........ 11

Summary of Contents for 60003












Search results

Summary of Contents for 60003

Reviews:

Related manuals for 60003

Brands by name

Popular brands

Weishi 60003, User Manual

Search results

Summary of Contents for 60003

Reviews:

Related manuals for 60003

Brands by name

Popular brands