Shanghai Weishi Mechanical CO.LTD.
5
Pleasure reset the system before operating the screen,or some parameters would
be locked and not revised caused by security.
Button/Display
Content
Reset state
Display the current system state.
Information of
graphics
processing
Display the current graphics processing.
processing
needle number
Display the number of current processing needles
total needle
number of
sewing patten
Display the total needle number of current sewing patten
Stitch Forward
In the trial sewing mode and when thread breakage, press
this button, the material presser will move to the next
stitch position.
Stitch Back
In the trial sewing mode and when thread breakage, press
this button, the material presser will move back to the
former stitch position.
Press down the
sewing foot
presser
Press down the sewing foot presser to thread as it break.
Pay attention to lift the foot presser after threading.
Single
step/continuous
processing
mode
Press the button to choose single step or continuous
processing mode.In single step mode
,
press start button to
enter the next processing after the current step is over. In
continuous processing mode
,
the system will perform all
the processes.
Processing
information
Display the current name of patten
,
start type
,
stitch
length
,
strengthening needle number
,
sewing speed
,
getting material speed.
Output count
and zero
clearing
Display the current cumulative value
,
press zero clearing
to count zero.
Back button
Press this button to sign out and return to system main
interface
4.Parameter Screen