5.6 The signal key
↓
The key can decrease the input signal.
5.7 The signal key
↑
The key can increase the input signal.
5.8 The beat number key
At first press the start/stop key (The LED is in red), and then press the beat
number key, you can manually adjust the bear number when the beat number
display screen is bright. The instrument starts to test as the select beat number
after pressing the start/stop key again.
5.9 The display mode key
First press the start/stop key (The LED is in red), and then press the display
mode key, you can select the vertical or level display method. The instrument
starts to test after pressing the start/stop key again.
5.10 The lift angle key
First press the stop/stop key (The LED is in red), and then press the lift angle
key, you can manually adjust the degrees of the lift angle by pressing the value
key
↑
↓
when the lift angle display screen is bright. The instrument starts to
calculate the amplitude as the new lift angle. (The setting parameter is 52°)
5.11 The printer key
The printer should connect with the host and turn on the power supply, at first
press the start/stop key to pause the machine (The LED is in red), the printer
will print the data after pressing the printer key again.
