- 6 -
2.2
Environmental and Operating Conditions
The module may only be used within its defined application parameters. It must be ensured that the module
and the fingers are sufficiently dimensioned for the intended application, and that the environment is clean
and the ambient temperature meets the requirements specified in the data sheet. Please observe the
maintenance instructions (see chapter 10). Furthermore, it must be ensured that the environment is free
from splash water and vapors as well as from abrasion or process dust. Excepted are modules that are spe-
cifically designed for dirty environments.
2.3
Product Safety
The gripping module uses state-of-the-art technology and complies with the recognized safety rules and reg-
ulations at the time of delivery. However, dangers may arise from the module if e.g.:
•
the gripping module is not used in accordance with its intended purpose.
•
the gripping module is installed, modified, or maintained improperly.
•
operators do not comply with the EC Machinery Directive, the VDE guidelines, the local safety and
accident prevention regulations, or with the safety and installation notes.
2.3.1
Protective Equipment
To provide protective equipment according to the EC Machinery Directive, a risk assessment in ac-
cordance with applicable standard is necessary.
2.3.2
Constructional Changes, Attachments, or Modifications
Additional bore holes, threads, or attachments not offered by Weiss Robotics as accessories may be mounted
only after obtaining the written approval of Weiss Robotics.
2.3.3
Special Standards
The following standards are met:
•
RFI voltage, interference field strength and emission according to EN 61000-6-3
•
Fast transients on signal and data lines according to EN 61000-4-4
•
HF power input on signal and data lines according to EN 61000-4-6
•
HF radiation according to EN 61000-4-3
•
Emissions according to EN 61000-6-4 Class A
•
Power frequency magnetic field according to EN 61000-4-8
•
Static electrical discharge according to EN 61000-4-2
