8-
2.4
Personnel Qualification
Assembly, initial commissioning, maintenance and repair of the gripping module may only be performed by
trained specialists.
Every person assigned by the operator to work on the gripping module must have read and understood the
complete operating manual, in particular chapter 2"Basic Safety Instructions". This also applies to personnel
who are only occasionally deployed, for example maintenance personnel.
2.5
Safety Considerations
Observe the
safety and accident prevention regulations applicable at the place of use.
Do not move any parts by hand when the module is connected to the power supply.
Do not reach into the open mechanics and the movement range of the gripping module.
Disconnect the power supply of the gripping module before any installation, modification or adjust-
ment work.
2.6
Indications of Particular Hazards
Risk of injury from falling and ejected objects! Provide protective devices to prevent objects from
falling or being thrown out, e.g. processed workpieces, tools, shavings, fragments, waste.
Risk of injury due to unexpected movements of the machine,
3
Warranty
The warranty period is 12 months from the date of delivery to the factory, provided that the device is used
for its intended purpose in single-shift operation and in compliance with the specified maintenance and lu-
brication intervals or up to 10 million gripping cycles. Parts touching the workpiece and wear parts are not
covered by the warranty. Please also refer to the General Terms and Conditions (GTC).
The gripping module is considered defective if its basic gripping function is no longer available.
