WARNING!
Always ANSI-approved eye protection
such as safety glasses and cover your mouth and nose
with a breathing mask to prevent inhaling dust particles.
This product is double insulated. Provided the tool is not
disassembled, this means that you are protected against
touching any parts that can be connected with live
electrical current.
GENERAL USE
This Jigsaw is designed to cut accurately through plastic,
wood and thin metals. It’s purpose is to provide versatile
cutting to your desired shape and has been designed for
DIY (Do It Yourself) and hobbyist purposes. The machine
has an adjustable base plate which allows you to set the
required angle for cutting the material. The six-sided
spanner provided has a dual purpose; loosening and
tightening of the adjustable base plate and the fitting of
the Jigsaw blade.
Before using the machine, carefully read the
instructions, especially the safety rules. Observe the
instructions to ensure your machine always operates
properly. Before attempting to operate the machine,
familiarise yourself with the controls and make sure you
know how to stop it quickly in an emergency. Save these
instructions and the other documents supplied with this
machine for future reference.
SAFETY INSTRUCTIONS FOR ALL POWER TOOLS
• Keep the work area clean
A cluttered work area may cause accidents.
Make sure the work area is well lit.
• Work environment
Never leave electric tools in the rain.
Do not use tools in damp or wet places.
Never use tools near flammable liquids or gasses
.
• Prevent electric shock
Keep the power lead away from heat, oil and sharp
edges. Avoid skin contact with exposed parts of the
power lead or plug.
• Store in a safe place
Tools that are not used must be stored in a dry and
locked place out of reach of children.
• Do not force the tool
The machine will do the job better and safer at the
rate for which it was intended. Damage caused by
forcing the tool is not covered by the warranty.
• Use the right type of tool
Do not use low-powered tools for heavy-duty
operations. Never use the tool for anything other
than its intended purpose.
• Wear suitable clothing
Do not wear loose clothing or jewellery that
might get caught in moving parts. Never wear
rings with protruding parts. Cover long hair.
Wear rubber footwear.
• Wear safety glasses
Wear a dusk mask when working in a dusty
environment.
GENERAL SAFETY RULES
