Wel-Bilt M141300A Owner'S Manual Download

Page: 19 / 70

Splitting Operation

WARNING

Before starting this log splitter, review the following instructions and safety information for safe
operation of the log splitter.

Failure to follow these rules may result in serious injury to the operator or bystanders from moving
parts that crush, cut, or entangle from flying objects, burns, fire, falling or tripping, or from carbon
monoxide poisoning.

General safety information:



Read manual.

Do not allow anyone to operate the log splitter who has not read the Owner's Manual or has not

been instructed on the safe use of the splitter.

The log splitter owner should instruct all operators in safe log

splitter operation.



Age restrictions

. Never allow anyone under 16 years old to operate the log splitter. Anyone 16 years and older

must be trained and supervised by a trained adult.



Intended use

. Log splitters should only be used for splitting wood logs, lengthwise with the grain. Do not use for

other purposes as unforeseen hazards may result.



Modifications

Never modify or alter the log splitter in any way. Modifications can create serious safety

hazards and will void the warranty



Attachments

. Never add attachments to the splitter, except for authorized accessories supplied by the

manufacturer with instructions for safe installation and use.



Engine speed

. The maximum engine speed is preset at a safe limit. Never attempt to modify the engine speed

setting to run at a higher speed.



Fuel/exhaust system

. NEVER modify or add to the exhaust system, fuel tanks, or fuel lines. Fire can result.



Remote control

. NEVER attach a rope, cable, or other remote device to the splitting control.



Splitting wedge

. NEVER attempt to change the height of the splitting wedge.



Pressure setting.

NEVER increase the pressure setting of the pump or control valve.



Safety equipment / controls

. Always operate the log splitter with all safety equipment in place and in good

working order, and all controls properly adjusted for safe operation.



Know how to stop

. Be thoroughly familiar with all controls and with the proper use of the equipment. Know

how to stop the log splitter and relieve system pressures quickly if needed.



Operating speed

. Always operate the log splitter at the manufacturer's recommended speed. The maximum

speed of the engine pump and push plate are preset within safe limits.



Daylight only

. Only use the log splitter in daylight so you can see what you are doing.



Smoking / sparks

. Never smoke while operating the log splitter, and never operate near sources of sparks or

flames.



Under the influence

. Never operate, or let anyone else operate, the log splitter while under the influence of

alcohol, drugs, or medication.



Unattended

. Never leave the machine unattended while the engine is running.



Refueling

. Never refuel the engine until it has cooled at least two minutes.



Adjusting / repairing

. Always make sure the engine is off before cleaning, repairing or adjusting the splitter,

except as recommended by the manufacturer. In addition, disconnect the spark plug and move all control handles
back and forth to relieve system pressure

before changing or adjusting hydraulic system components

such as

hoses, tubing, fittings or other components.



Replace labels

. Always make sure safety labels are in place and in good condition. If a safety label is missing or

not legible, order new labels because unsafe operation can result. Call 1-877-234-6869 to order new safety labels.