Removing the halogen lamp
1.
Use the socket wrench to remove the four hex bolts on the oven light.
The special construction means that the assembly of screws, trim,
glass panel and gasket including mount remains in one piece when
the screws are undone.
2.
Take the complete assembly off the cooking-chamber wall .
3.
Reach through the hole in the cooking-chamber wall into the reflector
housing and pull the halogen lamp out upwards in a straight line.
Fitting the halogen lamp
1.
■
To fit the halogen lamp, follow the steps in the reverse order that
you performed when removing it.
Do not overtighten the screws when refitting, because this may
break the moisture-tight seal for the reflector housing. (Overtighten-
ing the screws may crack the glass.)
■
When you have finished the job, remove all objects from the cooking
chamber and wipe down or rinse out the cooking chamber.
6 Servicing procedures
User manual
114