4.3.5 Using the external core temperature probe or sous-vide sensor
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in the chapter
'For your safety on page 18' and in this instruction manual, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
42
■
Putting away and retrieving the core temperature probe
56
Principle
In addition to the internal core temperature probe, which is permanently connected inside the cooking chamber, you can also
temporarily connector an auxiliary external core temperature probe or sous-vide sensor to an external connector on the out-
side of the appliance case. The internal core temperature probe is disabled as soon as a sensor is plugged into this external
connector. In other words, the software gives priority to the external core temperature probe or sous-vide sensor for a cook-
ing operation. It is NOT possible to use the external core temperature probe and/or sous-vide sensor at the same time as the
internal core temperature probe in a cooking operation, or to use the internal core temperature probe if an external core
temperature probe or sous-vide sensor is connected.
Requirements
■
The external core temperature probe or sous-vide sensor is clean, in working order and placed ready near the appliance.
■
The food has been placed correctly in the cooking chamber.
Connecting and using the external core temperature probe or sous-vide sensor
1.
Open the protective cap on the connecting socket for the external core
temperature probe or sous-vide sensor, located on the right above the
operating panel on the appliance case.
2.
Connect the external core temperature probe or sous-vide sensor to
the appliance by plugging it into the socket.
3.
Open the appliance door.
4.
Insert the core temperature probe or sous-vide sensor in the food.
5.
Close the appliance door.
Make sure you feed the sensor cable through a suitable point in the
door: the cable must not be fed into the cooking chamber in the area
around door-handle closing mechanism; it can be fed into the cooking
chamber at any other position and clamped between the appliance
door and hygienic plug-in gasket.
4 Cooking procedures
User manual
57
