5.2 Operating principles and instructions for fully automatic cleaning processes
5.2.1 How to perform fully automatic cooking chamber cleaning using connected
canisters
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in the chapter
'For your safety on page 18' and in this instruction manual, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
42
■
Emptying the condensate collecting tray in the loading trolley
91
■
Replacing the rinse aid canister
96
■
Replacing the cleaning agent canister
98
Handling canisters
■
Make sure that the canisters are in the intended position
Requirements
■
You are sufficiently familiar with using the software to be able to select and run different cleaning profiles; please refer to
the Operating instructions for the combi oven.
■
The appliance and fittings or accessories being used show no signs of damage.
■
The installed electrical power cables, water supply pipes and pipes for wastewater show no signs of damage, are fixed
securely, are not leaking from any point and appear safe and in working order on visual inspection.
■
No food has been left in the cooking chamber. There are no foreign objects in the cooking chamber.
■
All containers, baking trays, shelf grills and any other accessories have been removed from the cooking chamber.
■
The oven drain is not blocked or clogged with any residues. The filter is fitted in place on the oven drain.
■
The condensate collecting tray in the loading trolley is empty.
■
The empty loading trolley has been wheeled into the cooking chamber.
■
The interior glass door of the appliance door is secured properly in place.
■
The suction panel is properly locked in place.
■
The appliance door is closed.
■
You have provided the necessary cleaning resources for your cleaning program; see 'Preparing the cleaning agents' on
How to perform fully automatic cooking chamber cleaning using connected canisters
1.
Select the cleaning profile and start the cleaning process.
2.
Follow the prompts displayed by the software.
■
If the oven is being preheated, wait for the process to finish and
then proceed with step 4.
■
If the oven is being cooled, proceed with step 3.
5 Cleaning procedures
User manual
68