4.
Close the appliance door.
Result: Cleaning process in progress.
5.
Wait for the soak cycle to finish (about 5 to 10 minutes depending on
the cleaning profile).
6.
■
An audible signal is given when the soak cycle is finished.
■
You are prompted to add the cleaning agent.
■
The software displays for you the number of single-measure dis-
pensing bottles required.
7.
Open the appliance door.
8.
Risk of chemical burns or irritation to skin, eyes and respiratory
system
■
Do not let the cleaning agent or rinse aid from single-measure dis-
pensing bottles come into contact with skin, eyes or mucous mem-
branes.
■
During fully automatic oven cleaning, open the appliance door ON-
LY after being prompted by the software.
■
Wear personal protective equipment.
Add the cleaning agent from the single-measure dispensing bottles to
the cooking chamber.
If necessary for this procedure, pull the loading trolley out of the cook-
ing chamber and then push it back into the cooking chamber after
adding the cleaning agent.
9.
Close the appliance door.
10.
Wait for the wash cycle to finish (about 30 to 60 minutes depending on
the cleaning profile).
If the 'Express' cleaning program has been selected in the cleaning
profile, skip steps 11 to 15 of these instructions.
11.
■
An audible signal is given when the wash cycle is finished.
■
You are prompted to add the rinse aid.
■
The software displays for you the number of single-measure dis-
pensing bottles required.
In exceptional cases, you may be able to skip this step of adding rinse
aid depending on the water hardness and the amount of limescale in
the appliance.
12.
Open the appliance door.
13.
Add the rinse aid from the single-measure dispensing bottles to the
cooking chamber.
If necessary for this procedure, pull the loading trolley out of the cook-
ing chamber and then push it back into the cooking chamber after
adding the rinse aid.
5 Cleaning procedures
User manual
71
