7.
Wait for the wash cycle to finish (about 30 to 60 minutes depending on
the cleaning profile).
8.
■
An audible signal is given when the wash cycle is finished.
■
You are prompted to add the rinse aid.
■
The software displays for you the number of single-measure dis-
pensing bottles required.
In exceptional cases, you may be able to skip this step of adding rinse
aid depending on the water hardness and the amount of limescale in
the appliance.
9.
Open the appliance door.
10.
Add the rinse aid from the single-measure dispensing bottles to the
cooking chamber.
If necessary for this procedure, pull the loading trolley out of the cook-
ing chamber and then push it back into the cooking chamber after
adding the rinse aid.
11.
Close the appliance door.
12.
Wait for the final wash cycle to finish (about 20 to 30 minutes depend-
ing on the cleaning profile).
13.
■
An audible signal is given when the final wash cycle is finished.
■
Follow the prompts displayed by the software.
14.
■
Open the appliance door and check the cleaning result. The cooking
chamber should look clean and not smell of leftover food or cleaning
agents.
■
Check the cooking chamber for any foreign matter that may have
entered with the rinse water. Remove any foreign matter.
■
If the cleaning result is not good enough, either clean and rinse the
cooking chamber manually or run a cleaning profile again.
15.
Empty the condensate collecting tray from the loading trolley and rinse
it out with water.
16.
Leave the appliance door ajar to let the cooking chamber dry out.
5 Cleaning procedures
User manual
73
