3.
■
Place ready the new canister (1) filled with cleaning agent.
■
Feed the (red) supply tube plus suction nozzle (2) into the full canis-
ter (1) and screw it on.
■
Make sure that there are no kinks in the tube and that the vent hole
on the canister cap is unobstructed.
4.
■
Check the position of the canisters:
■
The surface on which the canisters sit must not lie above the level
at which the appliance feet meet the appliance case.
■
The surface on which the canisters sit must not lie more than 1
metre below this level.
■
Check that you have connected the tube to the correct connector.
■
The cleaning agent must be attached to appliance connector G.
(The colour red is used throughout.)
5 Cleaning procedures
User manual
99