6.3.2 Replacing the halogen lamp for the oven light
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in the chapter
'For your safety on page 18' and in this instruction manual, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
42
Spare parts contents
Spare part required as listed in the spare parts list:
■
1 halogen lamp 12V
Materials required
You will need the following materials:
■
Socket wrench, size 8
Handling the halogen lamp
Always wear clean gloves or use a cloth to handle the working halogen lamp. Never touch the glass bulb of new or reusable
halogen lamps with bare fingers.
If it is not possible to remove the halogen lamp intact e.g. the contact pins are left behind, contact a service engineer immedi-
ately.
Requirements
Check that the following requirements have been met:
■
The combi oven has been disconnected from the power supply and protective measures taken to ensure the power can-
not be switched on again.
■
The cooking chamber has cooled down to a temperature of < 60 °C after its last use.
■
The loading trolley has been removed from the cooking chamber.
■
The halogen lamp has cooled down.
■
The new halogen lamp has been checked for damage and is intact.
6 Servicing procedures
User manual
113
