5.2.3 How to clean the cooking chamber without using cleaning agents
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in the chapter
'For your safety on page 18' and in this instruction manual, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
42
■
Emptying the condensate collecting tray in the loading trolley
91
Requirements
■
You are sufficiently familiar with using the software to be able to select and run different cleaning profiles; please refer to
the Operating instructions for the combi oven.
■
No food has been left in the cooking chamber. There are no foreign objects in the cooking chamber.
■
The oven drain is not blocked or clogged with any residues. The filter is fitted in place on the oven drain.
■
The condensate collecting tray in the loading trolley is empty.
■
The loading trolley has been wheeled into the cooking chamber.
■
The interior glass door of the appliance door is secured properly in place.
■
The suction panel is properly locked in place.
■
The appliance door is closed.
How to clean the cooking chamber without using cleaning agents
1.
Select the cleaning profile and start the cleaning process.
2.
Wait for the cleaning process to finish.
3.
An audible signal is given when the cleaning process is finished.
Follow the prompts displayed by the software.
4.
■
Open the appliance door and check whether the expected cleaning
result has been achieved.
■
Check the cooking chamber for any foreign matter that may have
entered with the rinse water. Remove any foreign matter.
■
If necessary, either clean and rinse the cooking chamber manually
or run another cleaning profile.
5.
Empty the condensate collecting tray from the loading trolley.
6.
Leave the appliance door ajar to let the cooking chamber dry out.
5 Cleaning procedures
User manual
74
