5.5 Setting up the appliance on a stand
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
■
It must be possible to set up the stand in the installation position so that it cannot tip over or slide
about. The supporting surface must comply with requirements.
■
When setting up the appliance on a stand, it must be fixed using two adapter plates (to be ordered
separately):
The following rules must be observed to meet hygiene standards:
■
For stands that contain shelf levels for food containers, the top cover must be fitted on the stand to
prevent dirt getting onto any food held temporarily in the stand.
Setting up the appliance on a stand
1.
Place the two adapter plates on the stand, with the locat‐
ing pins pointing upwards.
2.
Screw the two adapter plates to the stand using two sock‐
et screws each.
5 Setting up the appliance
Installation manual
31
