5.2.7 How to clean the cooking chamber behind the suction panel
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings
specified in the chapter 'For your safety on page 13' and in this instruction manual, and follow the in‐
structions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
33
■
Inserting and removing racks
39
■
Removing and fitting the suction panel
61
Requirements
■
The cooking chamber has cooled down to < 60 °C after its last use.
■
You have the required cleaning agent available for use: spray bottle containing ConvoClean new or
ConvoClean forte; see 'Preparing the cleaning agents' on page 45
■
The oven drain is not blocked or clogged with any residues.
■
The left-hand rack has been removed.
How to clean the cooking chamber behind the suction panel
1.
Remove the suction panel.
2.
Use the spray bottle to spray the cleaning agent onto all
sides of the suction panel and onto the area behind the
suction panel.
3.
Leave the cleaning agent to work for 10 to 20 minutes.
4.
Rinse out the suction panel from all sides, the area be‐
hind the suction panel and the entire cooking chamber
thoroughly with an external water spray, or wipe out the
cooking chamber, the accessories and the area behind
the suction panel thoroughly with plenty of water and a
soft cloth.
For heavy soiling, you can repeat the cleaning process.
5.
Refit the suction panel.
6.
Check that the suction panel is fitted correctly:
■
The suction panel is in place and secured at the top and
bottom.
7.
Leave the appliance door ajar to let the cooking chamber
dry out.
5 Cleaning procedures
User manual
54
